TDM Engineering Blog
Engineering Insights
Technical guides, CAD tips, and industry insights from the TDM Engineering team.
Featured Articles
Design Automation
What is iLogic? A Practical Guide for Engineers
iLogic is Autodesk Inventor's built-in automation engine. In this guide we explain what it is, what it can do, and when you should use it.
November 15, 2024 ยท 6 min read
๐CAD Drafting
ISO vs ASME Drawing Standards โ What's the Difference?
ISO and ASME are the two dominant engineering drawing standards used globally. This article explains the key differences and when each applies.
October 28, 2024 ยท 5 min read
All Articles
Sheet Metal
Bend Allowance in Sheet Metal Design โ A Plain English Guide
Bend allowance is one of the most misunderstood concepts in sheet metal design. Get it wrong and your parts will not fit. Here is how it works.
October 10, 2024 ยท 7 min read
๐๏ธTechnical Office
How to Successfully Outsource Your CAD Work
Outsourcing CAD work can save significant time and cost โ but only if you do it right. Here is a practical guide to getting the best results.
September 20, 2024 ยท 8 min read
โ๏ธDesign Automation
The ROI of Design Automation for Manufacturers
Design automation has a measurable return on investment. Here is how to calculate it and what to expect from an iLogic implementation.
September 5, 2024 ยท 6 min read
๐งฑ3D Modeling
5 Tips for Cleaner 3D Models in Autodesk Inventor
Clean parametric models save time downstream. Here are five practical tips for building better 3D models in Autodesk Inventor.
August 18, 2024 ยท 5 min read