TDM Engineering Blog
Engineering Insights
Technical guides, CAD tips, and industry insights from the TDM Engineering team.
Featured Articles
Design Automation
What is iLogic? A Practical Guide for Engineers
iLogic is Autodesk Inventor's built-in automation engine. In this guide we explain what it is, what it can do, and when you should use it.
November 15, 2024 · 6 min read
📐CAD Drafting
ISO vs ASME Drawing Standards — What's the Difference?
ISO and ASME are the two dominant engineering drawing standards used globally. This article explains the key differences and when each applies.
October 28, 2024 · 5 min read
All Articles
Sheet Metal
Bend Allowance in Sheet Metal Design — A Plain English Guide
Bend allowance is one of the most misunderstood concepts in sheet metal design. Get it wrong and your parts will not fit. Here is how it works.
October 10, 2024 · 7 min read
🏗️Technical Office
How to Successfully Outsource Your CAD Work
Outsourcing CAD work can save significant time and cost — but only if you do it right. Here is a practical guide to getting the best results.
September 20, 2024 · 8 min read
⚙️Design Automation
The ROI of Design Automation for Manufacturers
Design automation has a measurable return on investment. Here is how to calculate it and what to expect from an iLogic implementation.
September 5, 2024 · 6 min read
🧱3D Modeling
5 Tips for Cleaner 3D Models in Autodesk Inventor
Clean parametric models save time downstream. Here are five practical tips for building better 3D models in Autodesk Inventor.
August 18, 2024 · 5 min read